Chemical bond characteristics and infrared reflectivity spectrum of a novel microwave dielectric ceramic CaIn2O4 with near-zero τf

Orthorhombic-structured CaIn₂O₄ ceramics with a space group Pca2₁ were synthesized via a solid-state reaction method. A high relative density (95.6 %) and excellent microwave dielectric properties (ε_r ～11.28, Qf = 74,200 GHz, τ_f ～ ?4.6 ppm/°C) were obtained when the ceramics were sintered at 1375 °C for 6 h. The dielectric properties were investigated on the basis of the Phillips–Van Vechten–Levine chemical bond theory. Results indicated that the dielectric properties were mainly determined by the InO bonds in the CaIn₂O₄ ceramics. These bonds contributed more (74.65 %) to the dielectric constant than the CaO bonds (25.35 %). Furthermore, the intrinsic dielectric properties of the CaIn₂O₄ ceramics were investigated via infrared reflectivity spectroscopy. The extrapolated microwave dielectric properties were ε_r ～10.12 and Qf = 112,200 GHz. Results indicated that ion polarization is the main contributor to the dielectric constant in microwave frequency ranges.     

Molecular fingerprint and machine learning to accelerate design of high-performance homochiral metal–organic frameworks

Computational screening was employed to calculate the enantioseparation capabilities of 45 functionalized homochiral metal–organic frameworks (FHMOFs), and machine learning (ML) and molecular fingerprint (MF) techniques were used to find new FHMOFs with high performance. With increasing temperature, the enantioselectivities for (R,S)-1,3-dimethyl-1,2-propadiene are improved. The “glove effect” in the chiral pockets was proposed to explain the correlations between the steric effect of functional groups and performance of FHMOFs. Moreover, the neighborhood component analysis and RDKit/MACCS MFs show the highest predictive effect on enantioselectivities among the four ML classification algorithms with nine MFs that were tested. Based on the importance of MF, 85 new FHMOFs were designed, and a newly designed FHMOF, NO₂-NHOH-FHMOF, with high similarity to the optimal MFs achieved improved chiral separation performance, with enantioselectivities of 85%. The design principles and new chiral pockets obtained by ML and MFs could facilitate the development of new materials for chiral separation.     

SRS: Spatial-tagged radio-mapping system combining LiDAR and mobile-phone data for indoor location-based services

One of the most challenging issues in radio received signal strength (RSS)-based localization systems is the generation and distribution of a radio map with a coordinate system linked with spatial information in a large indoor space. This study proposes a novel spatial-tagged radio-mapping system (SRS) that effectively combines the heterogeneous properties of LiDAR and mobile phones to simultaneously perform both spatial and radio mappings. The SRS consists of synchronization, localization, and map building processes, and enables real-time spatial and radio mapping. In the synchronization process, the distance range, motion data, and radio signals obtained through the LiDAR and mobile phone are collected in nodal units according to the sensing time. In the localization process, a feature variance filter is used to control the number of features generated from LiDAR and estimate the positions at which the nodes are generated in real time according to the motion data and radio signals. In map building, the estimated positions of the nodes are used to extract spatial and radio maps by using a unified location coordinate system. To ensure mobility, the SRS is manufactured in the form of a backpack supporting LiDAR and a mobile phone; the usefulness of the system is experimentally verified. The experiments are performed in a large indoor shopping mall with a complex structure. The experimental results demonstrated that a common coordinate system could be used to build spatial and radio maps with high accuracy and efficiency in real time. In addition, the field applicability of the SRS to location-based services is experimentally verified by applying the constructed radio map to well-known fingerprinting algorithms using the heterogeneous mobile phones.     

A review of phosphorescent and fluorescent phosphors for fingerprint detection

Currently, the efficient detection of fingerprints is essential for the crime investigations. Revealing fingerprints is commonly achieved with fluorescent organic compounds but they are not efficient for fingerprint detection on porous or reflective surfaces. In order to solve the problem of collecting fingerprints on porous/reflective surfaces, inorganic phosphors have been employed, since they have characteristics of variable color emission, afterglow, high chemical stability and nano-size, which allow the fingerprint detection on any porous or non-porous surfaces. Due to these last properties, this review presents a summary about the use of phosphorescent and fluorescent phosphors for the detection of latent fingerprints. First, we discussed the main physical and chemical characteristics of the fingerprints which permit their detection and collection from any surface. After this, we presented the main morphological, structural and luminescent properties of the phosphorescent and fluorescent phosphors that allow their use for fingerprint detection. Later, we demonstrated with pictures of fingerprints (with and without light emission from the phosphors deposited on them) that both, phosphorescent and fluorescent phosphors can be used to visualize fingerprints with high resolution and high contrast without interference of the background surface, which is ideal for its collection and registration in the Automated Fingerprint Identification System (AFIS). We believe that this review could be useful to understand how to select an appropriate phosphorescent or fluorescent material for fingerprint detection depending on the type of surface (porous or non-porous, reflective or not reflective) where the fingerprint is deposited.     

贵长猕猴桃皮HPLC指纹图谱及抗氧化谱效关系研究

目的:研究贵长猕猴桃皮HPLC指纹图谱与抗氧化活性的关系。方法:采用高效液相色谱法建立10批不同来源地贵长猕猴桃皮的指纹图谱,采用SPSS 13.0进行样品聚类分析和主成分分析;并通过DPPH和ABTS法测定其抗氧化活性,以EC50与共有峰峰面积数据为基础,应用皮尔逊相关分析法和逐步回归分析法研究谱效关系。结果:建立了10批贵长猕猴桃皮HPLC指纹图谱,确定了14个共有峰,相似度均>0.90。采用对照品比对方法指认了其中6个峰:2号峰没食子酸,5号峰原儿茶酸,9号峰表儿茶素,10号峰二氢槲皮素,11号峰4-香豆酸,12号峰落新妇苷,样本可聚为3类。皮尔逊相关分析与逐步回归分析结果显示:5号峰(原儿茶酸)和9号峰(表儿茶素)峰面积变化与贵长猕猴桃皮抗氧化活性呈显著正相关,对其抗氧化活性贡献度较大。结论:贵长猕猴桃皮具有较高的体外抗氧化活性,抗氧化活性的物质基础初步确定为贵长猕猴桃皮开发利用、质量评价提供依据。     

Evolution of core–rim structures and phase transformations in infra-red transmitting Y-α-SiAlON ceramics

Core–rim structures were observed as common features in Y-α-SiAlON ceramics hot-pressed between 1550?1950 °C. We found most dopants were taken into α’-rims, and a transition layer grown first on α-cores from liquid-phase over-saturated with metal solutes. Elongated β’-grain were formed as minor phase with α’- or AlN-cores thus only after the α’ matrix had consumed up all Y solutes, revealing that the α’ → β’ transformation is controlled by the transient liquid-phase and similar defects and dangling bonds could be detected in both SiAlON phases by cathodoluminescence. Quantitative assessment of Y_m/3Si_12?(m+n)Al_m+nO_nN_16?n demonstrates the multiphase evolution, initiated by over-saturation of Y solutes at low temperatures thus retaining α-phase as cores to lower the infra-red transmittance, dictated by homogenization of Al solutes at higher temperature. The elimination of those phase boundaries leads to better dopant and sintering design for achieving transparent and high-performance SiAlON ceramics.     

Ternary type BaY2ZnO5: Eu3+ deep-red phosphor for possible latent fingerprint,security ink and WLED applications

Pc-WLEDs are considered to play a spectacular role in future generation light sources in view of their outstanding energy efficiency. In this regard, Eu³⁺ activated BaY₂ZnO₅ phosphor was prepared and investigated by XRD, PL and SEM analyses. Rietveld refinement analysis was carried out to confirm the structure of the synthesized phosphor. The prepared phosphor shows an intense red emission around 627 nm under excitation by near UV light. The ⁵D₀-⁷F₂ transition intensity of the prepared phosphor is three times higher compared to the commercial (Y,Gd)BO₃:Eu³⁺ red phosphor. The CIE colour coordinates of BaY₂ZnO₅:Eu³⁺ (9mol%) phosphor corresponds to be (0.6169, 0.3742) and it has a high 97.9 % colour purity. The obtained results reveal the utility of BaY₂ZnO₅:Eu³⁺ phosphor as an efficient red component in WLEDs, anti-counterfeiting and fingerprint detection applications.     

Hydrothermally grown uniform TiO2 coatings on ZrO2 fibers and their infrared reflective and thermal conductive properties

Improving the infrared reflectivity of ZrO₂ polycrystalline fibers is of great benefit to its thermal applications. In the present research, we cast a highly uniform TiO₂ coating with a thickness ranging from dozens to hundreds of nanometers on ZrO₂ fibers by utilizing hydrothermal growth. The coating bonds tightly to the ZrO₂ fibers via Zr–O–Ti chemical linkages, and the thickness of the coating can be tailored by varying the hydrothermal growth time. The TiO₂ coating, acting as a sheath towards electromagnetic radiation, not only reflected light with wavelengths ranging from the visible region to the infrared region and up to 8 μm but also shielded the Raman signals of the ZrO₂ fibers. The present research provides an efficient way to cast controllable and uniform coatings on flexible fiber materials. The obtained ZrO₂ fibers coated with TiO₂ may have applications such as reinforcement for bulk ceramics, thermal barrier coatings, aerogels, etc., thus performing the dual functions of mechanical strengthening and thermal insulation.     

利用非糖物质快速鉴别单花蜂蜜

本文利用非糖物质快速鉴别四种常见的单花蜂蜜(枸杞蜂蜜、荆条蜂蜜、枣花蜂蜜和洋槐蜂蜜)。利用固相萃取除糖提取蜂蜜非糖物质,并用高效液相色谱(HPLC)结合化学计量学进行蜂蜜花源的判定。发现了四种单花蜂蜜的非糖特征标志物。芦丁、丁香酸甲酯、阿魏酸的含量在四种蜂蜜中差异最大。对羟基苯甲酸和脱落酸在枸杞蜂蜜中平均含量分别为0.59μg/g和0.42μg/g,可作为枸杞蜂蜜的花源标志物;对香豆酸和肉桂酸在荆条蜂蜜中平均含量为0.08μg/g和0.05μg/g,可作为荆条蜂蜜的潜在花源标志物;阿魏酸、异阿魏酸是枣花蜂蜜的特征标志物,平均含量分别为0.40μg/g和0.76μg/g;洋槐蜂蜜的特征标志物是芦丁和丁香酸甲酯,平均含量为0.08μg/g和0.14μg/g。利用高效液相色谱指纹图谱结合化学计量学方法(主成分分析和判别分析),四种单花蜂蜜依据其花源被成功区分。本研究对蜂蜜真实性判定有重要参考价值,为后续蜂蜜真伪鉴别奠定基础。     

Impact of rare earth europium (RE-Eu3+) ions substitution on microstructural,optical and magnetic properties of CoFe2−xEuxO4 nanosystems

In this study, pure cobalt ferrite (CoFe₂O₄) nanoparticles and europium doped CoFe₂O₄ (CoFe_2−xEu_xO₄; x = 0.1, 0.2, 0.3) nanoparticles were synthesized by the precipitation and hydrothermal approach. The impact of replacing trivalent iron (Fe³⁺) ions by trivalent rare earth europium (RE-Eu³⁺) ions on the microstructure, optical and magnetic properties of the produced CoFe₂O₄ nanoparticles was studied. X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectra exposed the consistency of a single cubic phase with the evidence of Eu₂O₃ phases for x ≥ 0.2. FTIR transmittance spectra showed that, the all investigated samples have three characteristic metal-oxygen bond vibrations corresponding to octahedral B-site (υ₁ and υ₂) and tetrahedral A-site (υ₃) around 415 cm⁻¹, 470 cm⁻¹ and 600 cm⁻¹ respectively. XRD and energy dispersive X-ray spectroscopy studies affirmed the integration of RE-Eu³⁺ ions within CoFe₂O₄ host lattice and decrease of average crystals size from 13.7 nm to 4.7 nm. Transmission electron microscopy (TEM) analysis showed the crucial role played by RE-Eu³⁺ added to CoFe₂O₄ in reducing the particle size below 5 nm in agreement with XRD analysis. High resolution-TEM (HR-TEM) analysis showed that the as-synthesized spinel ferrite, i.e., CoFe_2−xEu_xO₄, nanoparticles are single-crystalline with no visible defects. In addition, the HR-TEM results showed that pure and doped CoFe₂O₄ have well-resolved lattice fringes and their interplanar spacings matches that obtained by XRD analysis. Magnetic properties investigated by the vibrating sample magnetometer technique illustrated transformation of magnetic state from ferromagnetic to superparamagnetic at 300 K resulting in introducing RE-Eu³⁺ in CoFe₂O₄ lattice. At low temperature (~5 K) the magnetic order was ferromagnetic for both pure and doped CoFe₂O₄ samples. Substitution of Fe³⁺ ions in CoFe₂O₄ nanoparticles with RE-Eu³⁺ ions optimizes the sample nanocrystals size, cation distribution and magnetic properties for many applications.